If your Brother printer is not responding to your request because it displays the ‘Printer Offline’ message, you can learn how to bring your printer online or adjust your printer settings. Your printer will then be back online so you can print again. You can fix the Brother printer offline in windows 10 if you are using a brother printer offline.

Brother Printer

How to move your printer from offline to online. You can then easily resolve your printer offline problem as the printer has an integrated feature that allows you to toggle between offline and online modes. This will allow you to get back your Brother printer online. If your problem persists, you will need to change your printer setup to restore normal printing functions.

The printer status has been set to Offline or Paused

To resolve this issue, follow the steps below:

STEP 1: Make sure the Brother machine has been turned on and that there are no errors

  1. The screen of your Brother machine (after this referred to as LCD) may be blank and the machine might not be powered on. To check if the machine wakes up from sleep mode, you can inspect it.
  2. Ensure that it is plugged into a functioning socket and that any power switches are ON.
  3. For any error messages, check the LCD. For example, “Paper Jam” and “Ink/Toner Full”. Troubleshoot any LCD error messages to resolve the problem.

NOTE: This solution is not applicable if the machine cannot be powered on. Troubleshoot the hardware issue.

STEP 2: Make sure that the printer is connected to the computer

  1. Ensure that the USB cable is connected to the printer and the computer.
  2. Connect it directly to your computer, and not through a hub.
  3. Ensure you have an Ethernet cable connected to the printer and the router/access point.
  4. To verify the IP address, print the network configuration page.
  5. To verify the IP address of a wireless connection, you can print the network configuration page.

STEP 3: (Windows): Make certain your Brother machine is set to be the default printer

Check the folder for printers and make sure that is marked on your Brother machine icon.

  1. Open the Control Panel. (Click here for instructions on how to open Control Panel. )
  2. Sound Devices, Printers, and Hardware.
  3. Printers and Devices that Click Start.
  4. To ensure the checkmark does not appear on your Brother machine’s screen, right-click the icon and choose Set as the default printer.

STEP 4: (Windows): Delete all printer jobs in the Devices and Printers window

  1. Right-click on the icon to show Brother’s printer. Cancel all documents.
  2. Click Open as Administrator if Cancel All Documents appears grayed out. Enter your administrator password and click Yes.

STEP 5: (Windows): Verify the status of your printer in the Devices and Printers window

If your printer status is Offline

  1. Right-click on the Brother icon to see what’s printing Printer Use the Printer Offline (removes checkmark).
  2. Click Open as Administrator if Use Printer Offline appears gray. Click Yes to confirm.

If your printer status is Paused

  1. Right-click on the icon for Brother’s machine to see what’s printing Printer Pause Printing. (removes checkmark).
  2. Click Open as Administrator if Pause Printing is grayed out Enter your administrator password and click Yes.

STEP 6: (Windows): A copy of the icon for your Brother machine

(For example BrotherXXXXXXXXX (Copy 1)) can be found in Devices and Printers

You can create a copy of your printer using the same name printer if you:

  1. Modified the USB port of your computer that is connected to the Brother machine.
  2. Multiple times I have installed the same printer driver.

You may find that some of the printer drivers are not working properly. Select a printer driver you are familiar with to print.

To verify which printer driver is functioning, follow the following steps:

Turn on the Brother machine. Turn the Brother machine only on those machines that are connected.

  1. Open the printer folder
  2. Open the Control Panel. (Click here for instructions on how to open Control Panel. )
  3. Sound Devices, Printers, and Hardware.
  4. Printers and Click Start Device.
  5. Move your cursor over the printer icon to display the printer status popup.
  6. The status of Ready means that the printer driver is functioning correctly. When printing, select this printer driver.
  7. You can set this printer as your default printer by right-clicking the printer’s icon. This will display a checkmark on the icon of your machine and will automatically select this printer driver when you print again.

STEP 7: (macOS) – Make sure that you have the correct printer driver for your Brother machine.

  1. Preferences for Apple Menu System Print Scan or Printers Scanners
  2. Choose your Brother machine from the Printers section.
  3. Verify which printer driver was used. This information can be found near the Type.
  4. Select the AirPrint printer driver and add the CUPS driver to your Mac, as described below
  • Preferences for Apple Menu System Print Scanner or Printers Scanner.
  • Click on the + button
  1. Click on the Default icon at the top right of the dialog box.
  2. Choose your machine from the Name List.
  3. In the Use List, make sure “XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX+ CUPS” is selected. (Where XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXx is your model name. )
  4. Click Add.
  5. You can now find the printer in the Printers section.
  6. Select Quit System Preferences in the Apple Menu.

Why is my Brother Printer offline, but it shows online?

Many Windows users have reported offline issues with their Brother printers, even though they are fully functional and connected. This error usually occurs in printers that use wi-fi networks. You should then follow the technical instructions for troubleshooting and offline printer error.

  1. Click on the start button at the top of the screen and choose the right-click option.
  2. Click on “Devices & Printers” to open a small screen.
  3. The next tab will open PanelHardware and Sound Devices and Printers.
  4. Next, locate your printer model by right-clicking on it. Click on See What’s Printing.
  5. Reset the printer by clicking on Set as default.

Brother printer connected via Wi-Fi, but not on Windows?

Verify that your Brother printer is working properly and follow the troubleshooting instructions to get it back online.

  1. If the LED light on your Brother printer is not working, you must turn it off.
  2. Turn on your printer to ensure it isn’t in sleep mode.
  3. Also, check your power supply and plug.
  4. This solution is not applicable if you cannot turn on your printer.
  5. First, you must resolve the power supply problem.
  6. Make sure your screen doesn’t flash messages like Paper Jam, Ink/Toner Full.
  7. First, confirm that your access point or wireless router is up and running.
  8. Find your SSID, the name of your wireless network, and your key to your wireless network.
  9. It is possible to ask your Internet provider or network administrator for this
  10. For a better network, place the Brother machine near the router.
  11. Verify that the machine has been turned on.
  12. Press “Menu”.
  13. Click “Network” to continue and hit “OK”.
  14. Click “Setup Wizard” to continue and then press “OK”.
  15. Press “^”.
  • Choose your network and hit “OK”.
  • Enter your Password, and then press “OK”.
  1. Click “OK”. Press “OK”. The WLAN report is printed and the wireless signal indicator lights up on the Home screen. The printer is now connected and ready for printing.

If your brother printer is not working and you cannot print, you should call support immediately. They can provide immediate solutions to any Brother printer issues.

Also Read: 4 Tips for Starting an Industrial Business

Comments are closed, but trackbacks and pingbacks are open.