If you don’t know much about the IPC 7711 21 certification training and seek to gain knowledge about it, this is the right place. In this article, we will understand everything there is to about the certification and a little more.

Before we start with the IPC-771/21 certification, you should have the basic knowledge of what IPC is since the certification is offered and revolves around it.

Institute of Printed Circuits (IPC)

Institute of Printed Circuits, commonly known as IPC or IPC (electronics), is an institution/organization well known for its quality standards in the electronic industry.IPC is a trade association whose mission is to standardize electronic equipment and assembly and manufacturing criteria. The American National Standards Institute (ANSI) has accredited IPC as a standard developing organization [2], and its standards are recognized worldwide. It publishes the electronics industry’s most extensively utilized acceptance standards.

IPC hosts IPC APEX EXPO, North America’s largest electronics manufacturing trade event, which attracts over 9,000 professionals from 45 nations. The exhibition was held at the San Diego Convention Centre in 2020. The IPC Apex Expo 2021 will be held in San Diego from January 23 to 28.

Certifications by IPC 

The electronics manufacturing sector uses IPC standards. More than 3600 trainers are certified to train and test on the standard around the world. Standards are developed by volunteer industry committees. Many standards are introduced by IPC which include IPC-T-50, IPC-2615, IPC-D-325, IPC-A-31, IPC-ET-652, IPC-2612, IPC-2141A,  IPC-2221, IPC-2223, IPC-2251, IPC-7351B, IPC-FC-234, IPC-4562, IPC-4101, IPC-4202, IPC-4203, IPC-4204, IPC-A-600, IPC-A-610, IPC-6011,IPC-6012, IPC-6013, IPC-6018, IPC- 6202, PAS-62123, IPC-TF-870, IPC-FA-251, IPC-3406, and IPC-3408.

IPC-7711/7721 certification

What is the IPC-7711/21 standard about?

IPC-7711/7721 is a quality standard certification based on the “Rework of Electronic Assemblies/Repair and Modification of Printed Boards and Electronic Assemblies” standards published by the Institute of Printed Circuits (IPC). It’s a program that can provide Certified IPC Trainers and their employers with a valuable, industry-recognized accreditation.

Maintenance and checking of quality standards are essential for any product, and when we talk about electronic components, it becomes even more crucial. The main two reasons for this are safety concerns and providing quality products that can be used effectively.

Getting a little deeper into the quality standard certificate, the IPC-7711/7721certification serves to verify and authenticate a person’s knowledge and skills in electronics assembly, rework, and repair processes. Component installation, through-hole component removal, surface mount, wire splicing, and chip rework processes all fall under this category. Students gain advanced direct or hands-on board repair procedures through the IPC 7711 21 certification training curriculum.

This certification is not a basic or introductory level standard, and the applicants should have the basic knowledge of repair procedures prior to applying for this certification.

The standard has multi-levels depending on the skill base of the individuals. Master Instructors, Certified Instructors, Applications Specialists, and the CSE and Senior IPC 7711/21 CSE levels are all part of the IPC 7711/21 certification program.

After successful certification, the IPC 7711/21 CSE and Master CSE for the 7711/21 retains their validity for a period of two years. Credentialed individuals must re-certify when the two-year certification period has expired.

The IPC-7711/7721 course is a step-by-step procedure that aims to improve students’ technical skills and abilities so that they can become Certified IPC professionals.

Who is the certification program for?

Anyone who seeks to gain technical knowledge and skill related to the rework and repair of printed circuit boards can apply for the program. However, given that the applicant has basic knowledge and skill related to the rework and repair processes. Individuals who wish to show they have the ability to restore the operation of expensive electronics assemblies should get this certification. This might include manufacturers, technicians, or supervisors of quality assurance.

Operators and technicians with at least some knowledge and expertise in circuit board rework and repair should apply the processes in the IPC-7711C/7721C. The training builds on the information, skills, and abilities that the Certified IPC Specialist (CIS) applicant has already acquired through step-by-step procedure instructions.

Training

Individuals who want to get this IPC certification must take a training course offered by an IPC-approved and qualified training and certification establishment. Again, the IPC 7711/21 certification training is not meant to be introductory.

Topics covered in the training/ endorsement program

  • Printed wiring board circuit
  • laminate repair
  • Handling electronic assemblies
  • Conformal coating removal
  • MELF and Chip rework procedures
  • J-lead, SOIC/SOT, QFP rework
  • Component installation and Land preparation
  • Installation and removal of Through-hole component
  • Primary heating methods: convective, conductive, and others
  • Wire splicing procedures
  • Product classifications, tools, skill levels, and materials
  • Removal of through-hole component and Basic surface mount

Conclusion

Before applying for the certification, it is important to do proper research and understand its objectives and merits. Here with the gained skill and knowledge, the certification is also helpful in landing better job opportunities for the certified individuals.

Comments are closed, but trackbacks and pingbacks are open.